Septic to sewer Providers Near You

Many municipalities require conversion within a set timeframe after a sewer main is extended to your property, commonly two to five years. Conversion may also be required when a failing septic system cannot be feasibly repaired, when selling a property in an area with mandatory sewer connection ordinances, or as a condition of a building permit.

Total conversion costs typically range from $3,000–$15,000 depending on the distance from your home to the sewer main, excavation requirements, permit fees, and whether the old septic tank must be pumped and decommissioned. Connection fees charged by the municipality can range from $1,000–$10,000+ and are separate from contractor costs.

The old tank must be properly decommissioned, either pumped and crushed/filled with sand or gravel, or removed entirely. Local ordinances vary on requirements. Leaving a tank in place without decommissioning is illegal in most jurisdictions and creates a safety hazard. Your contractor handles this as part of the conversion scope.

The physical connection work typically takes one to three days once permits are approved. Permit approval timelines vary by municipality from a few days to several weeks. Plan for two to six weeks from application to completed connection, including final inspection and permit closure.

Some municipalities offer rebate programs, low-interest loans, or delayed connection fee payment plans to ease the conversion cost. Check with your local sewer authority or health department. In areas where septic systems are being phased out due to groundwater concerns, grant programs may also be available.

Yes. Conversion requires a licensed plumber or septic contractor who is also licensed for sewer work in your jurisdiction. The contractor must obtain the proper permits, coordinate inspections with both the building department and the sewer authority, and properly decommission the old septic system. Verify license and insurance before hiring.